manualshive.com logo in svg

Britax Safe-n-Sound BS7300E-020133 Series, Инструкции по установке и использованию

Поделиться
Скачать
Britax Safe-n-Sound BS7300E-020133 Series Скачать руководство пользователя страница 37

Instructions for Installation & Use

Instructions for Installation & Use

 

72

73

HOW TO USE

HOW TO USE

ADJUSTING HASSLE FREE HARNESS™ 
HEADREST 

A.  Loosen the harness straps before adjusting the headrest.
B.  To adjust the headrest, pull on the latch on the back of 

the restraint and pull up or down to position the top of the 
shoulder strap slot above the child's shoulders. Release 
the latch to lock the headrest in position. Pull headrest 
upwards to check it is locked in position. 

     This method can be used when the child restraint is 

installed in the vehicle in rearward facing position. Small 
adjustments may be possible with the child still in the 
seat. 

OR

B.  Pull the top of the padded insert forward to expose the 

"PUSH" label at the centre of the headrest.  Place finger 
on the "PUSH" button, press in towards restraint, lift the 
headrest loop to adjust upward or downward.   

     Be sure to use the ‘push’ button label as a guide. 

Press the ‘push’ button (approx. 10mm) into the recess 
behind the cover. Once released  check the headrest 
has latched by attempting to lift the headrest using the 
headrest loop.  

Ensure harness and headrest are positioned so that the shoulder straps are just above or inline 
with the child's shoulders but not lower. The bottom of the headrest side wings will usually be 
just above the infant's shoulders.
It is not necessary to remove the harness straps to adjust the headrest position. Refer to Care 
and Maintenance for cover removal page 83.

         IMPORTANT :

OR

Push 
button

Headrest 
loop

PLACING CHILD IN THE RESTRAINT

A.  Ensure the headrest and shoulder straps are 

adjusted to the correct height for your child (see 
page 71. Loosen shoulder straps by pressing the 
harness adjuster and pull both shoulder straps 
evenly. Pull out the desired amount of slack. Place 
the two harness tongues into the Buckle Tongue 
Holder (if supplied). 
Move the harness buckle towards the harness 
adjuster for easier fitment next time you put the 
infant in the carrier.

B.  Place child in the restraint and feed each arm 

through the shoulder straps. Pull harness buckle up 
between child’s legs.

Harness 
Tongue 
Holders  

Pull

Press

Содержание Safe-n-Sound BS7300E-020133 Series






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды