manualshive.com logo in svg

Britax Safe-n-Sound BS7300E-020133 Series, Инструкции по установке и использованию

Поделиться
Скачать
Britax Safe-n-Sound BS7300E-020133 Series Скачать руководство пользователя страница 44

Instructions for Installation & Use

Instructions for Installation & Use

 

86

87

CARE & MAINTENANCE

CARE & MAINTENANCE

To remove headrest cover from adjustable headrest without 
side wings:

Remove headrest cover by unclipping the press studs next to 
shoulder harness, place shoulder harness straps to the side. 
Unhook the elastic loop attached to the headrest cover. Lift 
over and away from headrest without side wings.

To Remove Alternative headrest cover with soft wings:

Remove headrest cover by unclipping the press studs next to 
shoulder harness. Unclip press studs from headrest without 
side wings moulding on each side. Place shoulder harness 
straps to the side. Lift headrest cover over and away from 
headrest without side wings.

Unhook elastic loop 
attached to headrest 
cover

Unclip press stud 
from moulding

Press 
Studs

Press 
Studs

Press 
Studs

D. Unhook the elastic loops at the top of the cover 

located at the back of the restraint and the elastic 
loops at the bottom of the restraint located under the 
front of the restraint.  

Unhook elastic loop at the back of 
the restraint

To remove headrest cover from adjustable headrest 
with side wings:

Remove headrest cover by unclipping the press 
studs next to the shoulder harness. At the back of the 
headrest hardware lift elastic loops over headrest and 
peel cover away from the seat.

TO REMOVE COVER

Содержание Safe-n-Sound BS7300E-020133 Series






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды