background image

Instructions for Installation & Use - Series No. 8300/A/2013

Instructions for Installation & Use - Series No. 8300/A/2013

TO REMOVE CHILD FROM RESTRAINT

Press the red button on harness buckle then both harness tongues will be released. You may lengthen the 
harness by pressing the adjuster button or lifting the adjuster lever and pulling the shoulder straps. Move 
each shoulder strap to the child's side, then remove the child. 
If the buckle tongue holders are provided then store the tongues in these. 

26

27

B.  Fit either harness buckle tongue into the harness buckle 

followed by the other tongue. A click is heard when the 
last tongue is fully engaged.  
Should the second tongue not insert - press the 
red button and reinsert the tongues. Check secure 
engagement by pulling harness straps. If the harness 
buckle does not engage correctly then it may require 
cleaning or seek replacement - refer to page 29.

C.  Ensure slack is removed from harness lap strap by pulling 

shoulder straps then pull harness adjustment strap to 
adjust harness to a comfortable but firm fit. Ensure that 
all slack in harness straps is removed. Shoulder harness 
straps must fit firmly to the child. A loose harness could 
result in serious injury in an accident. 

D.  Pull the harness adjustment strap to remove slack so 

the harness fits the child with minimal slack. Do not over 
tighten.

Do not use restraint if straps do not tighten and contact your 
local authorised service agent for repair.

Harness 
Lap Straps

Shoulder 
Straps

Crotch 
Straps

Pull to remove slack from 

harness lap straps

Click

Tongue

Buckle

B

C

WARNING : DO NOT LEAVE 

CHILDREN UNATTENDED IN 

THE CAR.

HOW TO USE

HOW TO USE

PLACING CHILD IN THE 

RESTRAINT

A.  Place the child in the restraint and feed 

each arm through shoulder straps. Pull the 
harness buckle up between child's legs.

     Engage the buckle tongues and tighten the 

harness as described on the next page.

Then, pull harness 
adjuster strap to tighten

Pull shoulder strap 
through the buckle

C.  Release the AHR Easy Adjust Headrest 

Lever so that it locks into position. Ensure 
that it has locked in position by gently 
pushing down on it.

D.  If the headrest is adjusted with the child in 

the seat, always check that the cover has 
not bunched up behind the child’s back.

NOTE: For comfort ensure the bottom edges 
of the headrest are not contacting the child’s 
shoulders but just above the shoulders. 

Lift the lever 
at the top of 
the headrest 
then pull 
up or push 
down 

Always adjust the height of the shoulder 
straps as the child grows.

         IMPORTANT :

Содержание MAXI GUARDSICT8300 A 2013 series
























Отзывы: