SPECIAL FEATURES
Two position
Adjustable height
of shoulder straps.
Fully adjustable
6 point harness.
Harness
Adjuster
Lock.
(Under Flap)
Harness
Adjustment
Strap.
Recline
Latch.
Padded cover
for comfort.
Vehicle
seat belt.
Front of vehicle
Harness
Buckle
Harness
Tongues
Support Base.
Easy fitting of
lap or lap-sash
seat belts.
Quick release
Harness Buckle.
(Red button)
Strap Connector
13
HOW TO USE
1.
2.
3.
4.
5.
6.
Upper shoulder strap slots.
Lower shoulder strap slots.
Shoulder harness straps.
Harness tongues & buckle.
Lap strap slots.
Crotch strap slots.
ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
Correct fitment of the harness is very important as it restrains the child in the restraint. The
harness must fit firmly around the upper torso of the child and be positioned so as to leave the
child's arms and legs free.
FOR CHILD USE: The shoulder straps must be in the slots
which are nearest to the child’s shoulders, but not more than
25mm below the child’s shoulders. If the harness straps are
more than 25 mm below the level of the child's shoulders
then the child is too large for the
restraint and the restraint
should not be used.
2
2
11
66
66
33
33
44
5
5
55
STEPS IN CHANGING SHOULDER STRAP SLOTS
8
The shoulder straps must be in
the slots which are nearest to
the child’s shoulders, but not
more than 25mm below the
child’s shoulders.
Upper Anchorage
Strap Adjuster.
Upper Anchorage
Storage Strap.
Attachment
Clip & Cover.
Anchor Fitting.
Adjustable Upper
Anchorage Strap
Length 1210 mm
from back of
restraint.
A.
B.
C.
D.
E.
F.
G.
Remove the restraint from the vehicle.
Lengthen harness as instructed on page 12 point A.
At the rear of the restraint, remove one of the harness shoulder
straps from metal Strap Connector by slipping strap through
open slot. The metal Strap Connector is shown right.
Pull one strap through slot.
Insert shoulder harness strap through slot which will
position shoulder harness strap level with or above the
child’s shoulders as shown right. Ensure that the shoulder
harness strap passes through matching slots in cover & body.
Ensure there are no twists in the harness strap and connect
shoulder harness strap to metal Strap Connector at rear of
restraint.
Repeat for other shoulder harness strap. It is better to change
one strap at a time so that the other strap will be a guide for
re-assembly.
WARNING:
Do not
use the restraint with harness
shoulder straps set at different heights or fed through
mis-matching slots. Ensure harness straps are not twisted and
that all straps are secure by pulling each harness strap.
25mm
Front of vehicle
To be used only in forward-facing position for a child weighing from 8kg to 18kg
