INSTALLING INTO VEHICLE
(FORWARD FACING)
HOW TO INSTALL
(UPRIGHT OR RECLINED)
A.
Determine whether an upright or reclined installation is preferred as shown below.
THIS RESTRAINT MUST BE USED IN A FORWARD FACING POSITION.
C.
D.
Position restraint in forward facing mode and align restraint centrally to the chosen seating
position as shown on page 8. Some vehicle seat fabrics (particularly
velours) may be damaged by a child restraint used
continuously. We recommend the need of a thick
towel or other protection to keep the vehicle
seat in good condition.
Fully lengthen seat belt. Insert seat belt into
child use seat belt path as shown right,
ensuring that the seat belt is behind the
harness straps and that the lap part of the
seat belt is below the hooks as shown right.
HOW TO INSTALL
E.
Engage seat belt buckle and tongue, ensure to remove all slack from lap part of seat belt by
pulling sash belt. Adjust the seat belt to hold the restraint firmly against the vehicle seat. For
inertia/retractable seat belts, allow excess belt to feed back into retractor.
Fit the attachment clip to the anchor
fitting as shown right. Make sure to
remove as many twists as possible
from the upper anchorage strap.
Tighten Adjustable Upper
Anchorage Strap by pulling
adjustment strap to
remove slack as
shown right, but do
not over-tighten
causing the restraint
base to lift off the
vehicle seat. Fold up
excess strap and use
storage strap to
neatly store excess
strap away from
child's reach.
F.
G.
Anchor
fitting
Attachment
Clip & Cover
11
Sash seat belt
Recline Latch
Upright
position.
UPRIGHT
Recline
position.
RECLINED
Front of vehicle
Child use
seat belt
path
A
B
Fully press & push Adjuster
Button (A) while pulling Upper
Anchorage Strap (B) to lengthen.
To return restraint to upright position press
Recline latch on the front of restraint base,
while with the other hand firmly grasp lower
front of restraint body, gently slide the
restraint body back to upright position.
B.
To recline restraint, press Recline latch
on the front of the Restraint base, while
with the other hand grasp the front of the
restraint body and slide forward.
10
Upper Anchorage
Strap
Storage
Strap
Upper Anchorage
Adjustment Strap
Pull to remove
slack
Anchor Fitting
Attachment
Clip & Cover
Hook
Hook
Ensure lap part of seat
belt is below the Hooks.
Lap seat belt
