HOW TO INSTALL
HOW TO INSTALL
36
37
K. Fit the attachment clip on the upper anchorage strap to the
anchor fitting as shown. Make sure to remove as many
twists as possible from the upper anchorage strap.
Always attach the hook and remove slack
L. Tighten the Adjustable Upper Anchorage Strap by
pulling the adjustment strap to remove slack as
shown below, but do not over-tighten causing the
restraint base to lift off the vehicle seat.
M. Roll up the excess strap tightly so the webbing is
thick enough to be held in the storage band.
Attachment Clip
Car's Anchor Fitting
Pull Adjustment
Strap to remove
slack
Storage
Band
Press
Roll up excess strap
tightly so the webbing is
thick enough to be held
in the storage band.
NOTE: Seat belt extenders should not be used if the seat belt is not long enough to secure the child
restraint. If they are used then the buckle tongue must not enter the seat belt path.
FITTING SUMMARY
Seat belt
'Lock-off'
Car's Anchor
Fitting
Pull to
remove
slack
Attachment Clip
& Cover
Storage band
Upper Anchorage
Adjustment Strap
Upper Anchorage
Strap
Forward-
Facing seat
belt path
Car's seatbelt
IMPORTANT:
Always roll up the
excess Upper Anchorage
Strap.
FORWARD-FACING BELT PATH;
marked in yellow.
Содержание 7300 A 2010
Страница 30: ...58 59 NOTES NOTES ...