manualshive.com logo in svg

Britax 7300 A 2010, Инструкции по установке и использованию

Поделиться
Скачать
Britax 7300 A 2010 Скачать руководство пользователя страница 18

34

35

INSTALLING INTO VEHICLE FORWARD-FACING

(UPRIGHT OR RECLINED)

A.  Remove the seat from the vehicle by 

disengaging the seat belt and upper 
anchorage strap.

B. 

 Remove the Insert Pad (if fitted) as 

this is no longer required. 

C.  To store the Stabilising Bar, lift the 

cover at the end of the seat which 
uncovers the stabilising bar storage 
recess.

D.  Press the button on the left side 

(facing seat) and gently push 
stabilising bar back and then down 
into the recessed area.

E.  Re-attach the cover at the end of 

the seat.

Rotate 
backwards 

Stabilising 
bar

Hook and Loop 
attachment

          IMPORTANT:

DO NOT USE RESTRAINT IN FORWARD-FACING POSITION WITH THE STABILISING 
BAR PULLED OUT. 
Do not recline into baby position when using restraint in forward-facing child use mode.

Ensure the harness is in the correct position (Refer to pages 32).

Then push 
inwards 

Button under trim

HOW TO INSTALL

HOW TO INSTALL

Ensure lap part of 
seat belt is below 
the hooks

Pull the sash belt 
through the lock-off 
to fully tighten the 
seat belt

Slacken the sash 
belt and feed into the 
lock-off

Lap Seat Belt

Pull sash portion 
of seat belt to 
remove slack

1

F.  Position the restraint in forward-facing 

mode and align restraint centrally within the 
chosen seating position. 

     Some vehicle seat fabrics (particularly 

velours) may be damaged by a child 
restraint used continuously. We recommend 
the use of a full Messy Mat™or thick towel 
to keep the vehicle seat in good condition.

G.  Fully lengthen seat belt. Insert seat belt 

tongue through the child use seat belt path 
(yellow path), ensuring that the seat belt is 
behind the harness straps and that the lap 
part of the seat belt is below the hooks as 
shown.

H.  Engage the seat belt buckle and tongue, 

ensure to remove all slack from the lap part 
of the seat belt 1 by pulling sash belt 2. 

I.   Grasp the sash belt 2 between thumb and 

fingers in each hand and allow some slack 

in the belt. Now slide the slack belt up into 
the lock-off slot, up to the top of the slot. 
If the belt is not slack it will not enter the 
lock-off slot.

J.  Pull the sash belt 2 through the lock-off to 

fully tighten the seat belt. The sash belt 2 
must not be tight when feeding it into the 
lock-off slot. The child restraint should now 

be firmly fitted to the vehicle seat.

     Allow the excess sash belt to feed back into 

retractor. 

H

I

J

2

Содержание 7300 A 2010
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды