![Britax 7300 A 2010 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/britax/7300-a-2010/7300-a-2010_instructions-for-installation-and-use_2813895013.webp)
24
25
PLACING BABY INTO RESTRAINT
A. Ensure the Headrest and shoulder straps are adjusted to the correct height for your child (see page
13).
B. Slacken the Upper Anchorage Strap and allow the straps to fall to the sides of the restraint for easy
access to the baby.
C. Slacken Harness Straps by pushing and holding the Harness Adjustment Button, grasping BOTH
shoulder harness straps and pulling out the desired amount of slack. Release harness adjustment
button when there is enough slack and place the buckle tongues over the side of the seat so that
the baby does not lay on them.
D.
Lay baby on their back into restraint and fit harness as shown. Make sure the baby is dressed to
allow harness buckle to be pulled up between baby’s legs e.g. a jump suit.
IMPORTANT:
Always ensure the baby’s arms and legs are free. Never wrap baby in a blanket
before placing in restraint.
Lower shoulder height marker
hidden when Headrest is the
lowest position.
Adjustable
Headrest
Harness
shoulder straps
Slackened Upper
Anchorage Strap
Adjuster for the Upper
Anchorage Strap
Adjuster Strap
Harness Adjustment Button
Car's
Anchor
fitting
HOW TO USE
HOW TO USE
D. Fit either harness tongue into the
harness buckle followed by the
other tongue until a click is heard.
Should the second tongue not
insert, press the red button and re-
insert the tongues. Ensure secure
engagement by pulling harness
straps.
E. Remove slack from harness lap
straps by pulling shoulder straps.
F.
Adjust the harness to a firm but
comfortable fit by pulling the
harness adjustment strap.
G. Re-tighten the Adjustable Upper
Anchorage Strap by pulling the
Adjustment Strap to remove slack
as shown. Roll up the excess strap
tightly so the webbing is thick
enough to be held in the storage
band.
Click
Tongue
Buckle
Harness Lap Straps
Shoulder Straps
Crotch Straps
Pull to remove
slack from
harness lap
straps
D
F
Pull Adjustment
Strap to remove
slack
Storage
Band
Press
Roll up excess
strap tightly so the
webbing is thick
enough to be held
in the storage band.
Содержание 7300 A 2010
Страница 30: ...58 59 NOTES NOTES ...