Britax-Romer KIDFIX OEM, Инструкция пользователя

Страница: 10 / 23

05
07 06
08
- 9 -
7. INSTALLATION WITH BACKREST
7.1 FASTENING WITH ISOFIT LOCKING ARMS AND BACKREST
The child seat is installed permanently in the vehicle with the ISOFIT locking
arms.
Your child is then buckled into the child seat with the vehicle's 3-point seat belt.
01 02
1. If your vehicle is not fitted with ISOFIX insertion aids by standard, clamp
the two insertion aids
02
, with are included in the scope of delivery of
the seat*, with the section pointing upwards to the two ISOFIX fastening
points
01
of your vehicle.
TIP! The ISOFIX fastening points are located between the surface and
the backrest of the vehicle seat.
* The insertion aids facilitate the installation of the child safety seat with the use of the ISOFIX
fastening points and prevent damage to the car seat covers. As long as they are not used, remove
them and keep them in a safe place. For vehicles with foldable a backrest, the insertion aids need
to be removed before folding the backrest. Any problems occurring usually come from soiling or
external objects on the insertion aids and on the hook. Remove soiling or external objects to rectify
such problems.
2. Moving the headrest of the vehicle seat into the top position.
3. Carry out the steps in Section 6 " ADJUSTING THE HEADREST ".
4. Hold the ISOFIT settings button
08
down and push
the ISOFIT locking arms
05
out in full.
5. Push the green safety button
07
and the red release
button
06
on both sides of the seat towards each
other. This ensures that both hooks on the ISOFIT
locking arms
05
are open and ready to use.
160831_KIDFIX_OEM_XP_OEM_EN.indd 9 30.09.2016 08:33:44