Britannia Refresh Maxi, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 72

REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Assembly, Installation and Commissioning
2.3.1.3 Tools, Equipment, Consumables and Fixings Required
Tools:

Spirit level

Suitable spanner to tighten M6 fixings

Suitable tool to tighten the canopy to the kitchen wall (where necessary).
Equipment:

Mobile tower scaffold

Podium steps

Steps (when required)

Scissor Lift (when required)

Suitable and approved lifting equipment

Adjustable support stands

Battery Powered Impact Drill

Battery Powered Hammer drills

Battery Powered Hand drills

Battery Powered Grinderette.
Consumables:

Unistrut

Fixings box containing an assortment of mechanical fixings and accessories

Silicone sealant.
Fixings:

M6 fixings

M10 fixings

Suitable screws, plugs or anchors as necessary (to fix the canopy against the wall).
2.3.1.4 General Installation Notes
To avoid the risk of accidents and damage to the kitchen Refresh Unit the following should be
adhered to:

You must install the Refresh Unit in accordance with these instructions

Any installation work must be carried out by competent personnel

In all cases, a minimum of two competent personnel are required

Installation personnel should be fully trained in all relevant tools and equipment required to
successfully install the Refresh Unit

A safe method of access to the fixing points must be gained by use of previously identified
suitable access equipment

It is suggested that at least a small air change rate in the order of 10 to 15 air changes per
hour be incorporated if possible. This will provide a small amount of background ventilation,
create a negative pressure and help retain cooking odours within the kitchen space

Before installation, check the building structure to which the Refresh Unit is to be fitted for:
o
Electric cables
o
Gas pipes
o
Water pipes.
Issue: Final Page 21 of 70