Britannia Refresh Maxi, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 72

REFRESH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Operation
3. Operation
3.1 Introduction
This section provides operating instructions for the Refresh Control Panel. The Refresh Control
Panel is installed in the Refresh Ultima only.
Warnings and Cautions use the following conventions:

WARNING - danger of death or to the health of personnel

Caution - danger of damage to equipment.
3.1.1 Warnings and Cautions
Caution:
It is recommend that the end user should carry-out detailed in-house risk assessments for
all aspects of operating Refresh Units.
3.1.2 Operation Overview
3.1.2.1 Refresh Mini, Midi & maxi
The Refresh Mini, Midi and Maxi have a hand operated dial located toward the top of the unit which
the operator can turn to ramp-up the fan speed.
Dial Ramps–up the Fan Speed
3.1.2.2 Refresh Ultima
The Refresh Control Panel is comprised of an operator information screen and touch buttons. The
touch buttons allow the operator to:

Start the fans in Low Speed

Slow the fans from High to Med, or from Med to Low speeds

Stop the fans

Mute active alarm sounds

Access and cycle through information pages, messages and clock

Access the configuration pages

Accept any changes made in the configuration pages.
Issue: Final Page 27 of 70