Installation cont
.
Bath Filler
1. Identify all components are present prior to starting installation.
2. Slide the Plinth (6) and washer (7) onto the threaded tail of the tap and install the mixer
body (5) to the bath.
3. Using washers (8) and the backnuts (9) secure the mixer body (5) to the bath by tightening
the backnuts (9) onto the threaded tails (a suitable spanner maybe needed to fully tighten
the backnuts (9).
4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).
5. Turn the handles in both directions, letting the water flow for a few
minutes to check all joints and connections for leaks.
1.
Handle
x2
7.
Washer
x2
2.
Handle Lever
x2
8.
Backnut
x2
3.
Valve
x2
9.
Anit Splash
x2
4.
Mixer Body
x1
10.
Grub Screw
x2
5.
Plinth
x2
11.
Cap
x2
6.
Washer
X2
10
