BitPipe™Cellular Dev
-Kit
User Guide
Copyright 2017 Briowireless Inc.
31
8.
Autonomous Mode Demo
The
Autonomous Mode
allows the BitPipe
™
to be used without a controlling Host (or application). You
can read more about this operating mode in the BitPipe
™
Cellular modem datasheet.
To easily demonstrate how this mode works, a demo back-
end has been set up on Briowireless’ servers.
You may configure your BitPipe
™
to use this back-end to test and see how simple it is to configure, monitor
and control the BitPipe
™’s IOs.
To set-up your BitPipe
™
for this demo, it must be configured with
Briowireless’ server information. This
includes setting the
MQTT Hostname
,
MQTT Port
and
Keep-Alive Interval.
For your convenience, this
information can easily be configured by following these steps:
1-
Open the
Autonomous Mode Configuration
dialog from the “Tools” menu
2-
In the popped-
up dialog, click on “Load Demo Config”
The configuration for the demo is auto-filled in the form.
3-
Click on “Configure”
4-
Unplug the power supply from the BitPipe
™
5-
Turn the SW1-3 of the demo board to the ON position
6-
Configure the dipswitches on the board as the following:
SW1-1 = OFF, SW1-2 = OFF and SW1-3
= ON
.
7-
Plug back the power supply in the BitPipe
™
