================================================================================================
1009725-E
6
ASSEMBLY
STEP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Align the
Right Tow Bar tubing (3)
and the Left Tow Tube (4)
against the top of the Brush
Housing (45).
Attach the
tubes using the
hardware from
PANEL 01
as
shown here.
!
DO NOT TIGHTEN
THE FASTENERS AT
THIS TIME.
3
4
25
10
19
25
45
3
10
19
TIP 1:
An organized skinpack with all necessary hardware has been provided with this product.
Be sure to use the hardware panels called for in each step of the assembly.
NOTE:
Hardware Panels 08 and 09 will not be used in this assembly.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TIP 2:
During assembly you will need to shift the tires away from
the Brush Housing (45).
To do so, firmly grasp the Lower Pivot bar (43) in one hand,
and the Brush Housing (45) in the other. Pull apart.
NOTE:
This will especially come in handy on Step 1.
45
43
================================================================================================
