================================================================================================
1009725-E
16
ADJUSTING TO TRANSPORT POSITION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1.
Park towing vehicle on a hard,
level surface and set parking brake.
2.
Loosen (but do not remove) Knob (31)
and adjust the Lock Arm (1) to the 10th position
( As indicated on the Adjustment Label (41) ).
For adjustment instructions, see
the “Adjusting the Brush Height” section.
2
3
4
5
6
7
8
9
10
1
2
1
31
41
23
30
68
ATTACHING THE SWEEPER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1.
Park towing vehicle on a hard, level surface and set the
parking brake.
2.
Align Clevis (68) with towing vehicle hitch plate.
3.
Install Hitch Pin (23) through Clevis Assembly (68) and
towing vehicle hitch plate & secure with Hairpin Cotter (30).
Sweeper and Tow Bar will shift after removal
of Hitch Pin. Use caution when removing
Hitch Pin & moving sweeper.
REMOVING THE SWEEPER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1.
Confirm Hamper is empty
2.
Park towing vehicle on a hard, level surface and set parking brake.
3.
Remove Hairpin Cotter (30) and Hitch Pin (23).
4.
Push sweeper away from towing vehicle.
5. Install Hitch Pin (23) through Clevis Assembly (68) and secure
with Hairpin Cotter (30) for storage.
CAUTION: AVOID INJURY! BEFORE ATTACHING OR REMOVING THE SWEEPER, MAKE SURE
THE HAMPER IS EMPTY OF ALL MATERIAL.
OPERATION
