background image

1008590BH-E

5.

ASSEMBLY

================================================================================================

15 17

8

9

9

CAUTION

: Gloves are required when handling 

aerator tines.  Tines have extremely sharp points.  

Use caution when handling.

6. 

Position the 10 Tines (8) and 20 Bearings (9) onto the Tine 

Shaft as follows:

  *  Bearing (9), small end 

fi

 rst

  *  Tine (8)

  *  Bearing (9), large end 

fi

 rst

See Figure 4.

NOTE: Round projections on Bearings (9) must fi t 
into holes in Tines (8) and into two holes of opposite 
Bearing.

7. 

Place a 5/8" Flat Washer (15) and then a Square Bearing 

(17) onto the Tine Shaft between the last bearing and the 

End Panel, and Push the Square Bearing into the hole on 

the End Plate, see Figure 4.

Bearing (small end first)
Aerator Tine
Bearing (large end first)

8. 

Push the End Panels (1) toward the Tines (8) until there is no 

free play along the Tine Shaft and tighten the nuts (A) on the 

End Panels.  See Figure 6, 6 nuts total.

 

NOTE: The Square Bearings must be completely 
inserted into the End Panels before you tighten the nuts.

9. 

Push the end of the Tine Shaft with the fastened E Ring 

all the way towards the End Panel.  Add as many 5/8" Flat 

Washers (15) to the opposite end of the shaft as necessary 

to eliminate extra space.  Fasten the remaining E ring on the 

end of the Tine Shaft.

 

NOTE: Store extra Flat Washers in a safe location.  
You may need them for maintenance of End Panel 
Adjustment.

15 19

1

A

A

1

Figure 4

Figure 5

CAUTION

: Gloves are required when tightening 

End Panel Bolts.  Tines have extremely sharp 

points.  Use caution when working around them.

Содержание SA-400BH

























Отзывы: