background image

12

L-1681BH-M

English Manual

USE AND CARE

• 

The key to years of 

trouble-free service is to 

keep your Lawn Roller 

clean and dry. 

• 

Occasionally check all moving parts for free 

movement and, if necessary, lubricate with oil.

• 

Should rust develop, sand lightly and then paint 

area with enamel.

•  Periodically check all fasteners for tightness.

We recommend the following steps for  

the care of your Roller to prevent flat spots:  

If a flat spot develops during storage, first ensure 

the roller is empty. Next, leave it out in the sun to 

warm

 (we recommend sitting it out on pavement  

for at least one day). 

Once this is complete, roll it around to reduce  

the flat area. 

MAINTENANCE

OPERATION 

• 

Refer to tractor manual to determine proper 

towing capacity of your Tractor / Rider.

• 

Fill the roller with amount of  

water recommended for your tractor / rider. 

Screw in the plug and tighten securely.

• 

The plug has an o-ring to create a seal and 

prevents the drum contents from leaking out.

• 

For longest life, drain the roller, leave the 

plug out, and if possible, hang the roller 

when not in use to prevent possibility of 

developing a flat spot. 

•  If a flat spot develops on the roller during storage, ensure 

roller is empty then leave out in the sun to warm and roll 

around to reduce flat area.  

• 

Please note that sand may be used  

in place of water with no risk of freezing.   

• 

Ground condition is vital to good leveling.  

Soil should be moist, but not muddy.

• 

Refer to your Tractor or Riding Mower Owner’s manual for 

proper towing capacity and safe operation of your towing 

equipment. Towing / Stopping distances will be greatly 

affected by added weight of roller.

CAUTION! 

Do not overload your Tractor / Rider.   

Roller fully loaded with water weighs:

 

PRC-241BH  &  PRC-241BH-A    =  270 lbs

 

PRT-361BH  &  PRT-361BH-A   =  690 lbs

 

PRT-361SBH  &  PRT-361SBH-A   =  390 lbs

  PRT-481SBH  &  PRT-481SBHC-A  =  485 lbs

Rollers yield the best results when ground 

conditions are correct, and equipment is 

operating at 

less than 3 mph

.

CALIBRATING YOUR TRACTOR  

TO 3 MPH:

Measure a distance of 20 feet on a flat, 

level surface. Adjust tractor throttle and 

select a gear to cover this distance in 4.5 

seconds.

TRACTOR / RIDING  

MOWER SPEED

If possible, hang the roller when not in use to 

prevent the potential occurrence of the drum 

developing a flat spot.

For longest life, drain the roller and leave 

the plug out. 

Содержание PRC-241BH















Отзывы: