BRINKS BHS-3000A, Руководство пользователя

Страница: 43 / 54

33
Cleaning the Smoke Detector
Vacuum once every
three months
If you had a smoke/heat detector installed, you
should clean it once every three months. You
should also clean it if smoke or dust triggers an
alarm.
Vacuum the smoke detector vents using a
crevice attachment. Do not remove the cover.
If You Trigger an Alarm while Cleaning the Detector
If the dust from your vacuum cleaner triggers an alarm and the siren
sounds, do the following:
1. Enter your user code.
2. Press the CANCEL key.
3. Finish vacuuming the detector.
If the keypad is beeping and the message
window reads TROUBLE, wait 30 minutes for
the system to reset.
4. If you wish to silence the keypad’s beeping for
the next four hours, press the CANCEL key.
5. If the detector does not reset after 30 minutes,
the message window reads “TROUBLE, CALL
1-800-445-0872” and the keypad beeps. Call
Brink’s Customer Care at 1-800-445-0872.
Service the Detector Every Two Years
Every two years, you should contact Brink’s Customer Care to schedule
a visit to service the smoke detector. During this call, Brink’s does a
more thorough cleaning and testing of the detector.