BRINKS BHS-3000A, Руководство пользователя

Страница: 33 / 54

23
Testing All Burglary Sensors
This test helps to ensure that the system’s burglary sensors are working
properly.
No alarm signal is sent to the Brink’s Monitoring Center.
1. Make sure there is
nothing moving near
the motion detector
and that the READY
light is on. (If it is
not, see page 26.)
READ
Y
1. Make sure there is
nothing moving near
the motion detector
and that the
message window
reads READY. (If it
does not, see page
26.)
Press the OPTIONS
key.
DOOR CHIME
2. Press the
OPTIONS key until
the message window
reads DOOR
CHIME.
CHIME
2. Press the 2 key.
The ENTER CODE
light blinks.
3. Press 2, 4. Then,
press and hold the 7
key for three
seconds. *
3. Press 2, 4. Then,
press and hold the 7
key for three
seconds.
*
The message
window reads
READY DOOR
CHIME TEST.
4. Open each
protected door and
window. Listen for
the siren to blast.
Close the door or
window.
4. Open each protected
door and window.
Listen for the siren to
blast. Close the door
or window.
5. Walk in front of the
motion detector.
The siren blasts
each time the
motion detector
detects your
movements.
5. Walk in front of the
motion detector.
The siren blasts
each time the
motion detector
detects your
movements.
(continued)