Attach
Detach
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR STOVE.
Inspect contents of the box to ensure all parts are included and undamaged.
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.
(Proof of purchase will be required.)
3
Step 1
Open lid to allow wind guards to extend fully and
support the lid.
Step 2
Remove regulator assembly from under grill
inside stove. Replace grill. Make sure burner
control knobs are in "OFF" position.
Step 3
Attach regulator assembly to stove fitting. HAND
TIGHTEN ONLY. Do not cross-thread
connections.
Step 4
Attach propane cylinder to regulator assembly.
HAND TIGHTEN ONLY. Do not cross-thread
connections.
CAUTION:
Turn cylinder so that it is almost upright,
slanted slightly towards you. The cylinder
does not sit flat on surface. See diagram
below.
Step 5
Follow "
Gas Leak Testing
" instructions on page 4
of this manual.
Wind Guards
Cooking Grill
Regulator Assembly
Burner Control Knobs
NOTE:
Propane canister slants slightly
towards front of stove.
842-0300-0_MagMaxStove.qxd 1/5/05 4:45 PM Page 4
