Brill 400 GB, Руководство по сборке

Страница: 23 / 76

GB
23
When starting or switching on the
motor, the machine should not
be tilted unless the machine has
to be raised during the process.
In this case only tilt it as far as
absolutely necessary and only
raise the side away from you.
Keep the gingers and feet out of
the ways of the tool.
Never lift or carry a machine
with the motor running.
Stop the tool if the appliance has
to be tilted for transportation
over surfaces other than grass
and of the appliance is moved to
and from the surface to be
worked on.
Switch the motor off each time
before you work on the appli-
ance or leave it unattended.
If you strike an obstacle when
working, please disable the
machine. Unplug from the mains.
Remove the obstacle, check the
equipment for any damage and
have it repaired if necessary.
If the equipment begins to
vibrate strongly, unplug from the
mains and ascertain the cause.
Should the power cable be dam-
aged during use, the plug must
be immediately pulled out of the
socket. Under no circumstances
should the power cable be
touched before the plug has
been pulled out.
A
Taking a Break
Never leave the equipment unat-
tended. If you stop work,
unplug the equipment from the
mains and store the equipment
in a safe place.
If you stop work to go to a
different work area, it is essen-
tial to turn the equipment off
and unplug from the mains.
A
Beware of Environmental
Influences
Never use the equipment in the
rain or in damp, wet conditions.
Never work immediately adjacent
to a swimming pool or garden
pond with electrical equipment.
Comply with local quiet periods
in your community!
A
Electrical safety
Check the power cable regularly
for damage and signs of wear.
Only use permitted extension
cables.
Unplug the mains plug immedi-
ately if the mains cable / exten-
sion cable is damaged or severed.
As a user of the appliance, you
are responsible for Third parties
in your range of action.
The manufacturer warrants its
products for exclusively non-com-
mercial use for a period of
24 months from the date of orig-
inal purchase. This warranty does
not affect statutory warranty
claims. The warranty covers all
substantial faults of the product,
which are caused by defects in
material and workmanship. If
a product exhibits such a defect
we will, at our option, repair or
replace it without cost for parts
and labour provided the follow-
ing requirements are fulfilled:
.
The product must have
been sold to the customer in
a legally correct way.
.
The original receipt with the
customer’s address, date of
purchase, model and product
designation is presented as
proof of purchase. The product
must have been purchased
within the EC.
.
The product was handled
properly and according to the
recommendations in the oper-
ating instructions. It is essential
that the product has been main-
tained and cleaned according
to the information in the oper-
ating instructions. No attempt
to disassemble or repair
the product has been made
by either the buyer or an
unauthorised third party.
.
It must be ensured that only
original replacement parts and
original accessories approved
by the manufacturer are used.
There may be an increased
risk of consequential damage
and accidents if non-original
parts or non-original acces-
sories are used. This warranty
does not cover consequential
damages.
.
The product must be either
taken directly or sent with
postage paid to an authorised
service centre. The original
receipt must be sent with the
product.
.
The warranty does not cover
damage from misuse, abuse,
use of unsuitable, non-original
or unauthorised interchange-
able parts, replacement parts
or accessories, as well as
improper maintenance and
cleaning.
The products contain various
components that are subject to
normal or use-related wear.
The warranty does not extend to
these wearing parts.
Warranty