10
Maintenance
The vacuum pool cleaner does not require almost any maintenance. Look over it time to time and make
sure that:
The safety valve moves freely and there is no dirt preventing this move.
The disc is not too worn. If the disc is used after moving at the bottom of the pool, this is the right time
to change it.
While storing the vacuum pool cleaner, do not roll up the hose.
Leave it remaining straight on
the sheltered place protected against the direct sun. When you disconnect the parts of the hose, try to leave
the weight in place.
The vacuum pool cleaner hose is specially designed in order to ensure the optimal ef
fi
ciency of the vacuum
pool cleaner. In case you need to change it, use only original parts.
Denial of responsibility for your pool and vacuum pool cleaner
Your pool life is in
fl
uenced by many factors. Automatic vacuum pool cleaner is a passive
product that won’t have any in
fl
uence on the pool life.
Pleasem be aware of damages, change of colours and peeling off the paint over time caused independently
or combined with ageing, water texture imbalance, incorrect installation or other factors. Automatic
vacuum pool cleaner will not remove nor cause wear-out of the solid pool tiling. In fact, the pool tiling
will eventually cause the wear-out of the vacuum pool cleaner.
The same is valid for vinyl tiling for embedded pools because the vinyl surface is also in
fl
uenced by its
surroundings and factors (chemistry of water, insulation and construction supporting walls quality and
the pool bases. All these factors may contribute to the damage of the pool surface. In case, this situation
occurs, please, bear in mind that it isn’t caused by the vacuum pool cleaner. The producer refuses all
responsability for reparation or exchange for every from the pool components of the customer.
The pool owner must assume the responsability for the condition and maintenance of the pool surface,
water and edges of the pool.
EN
