background image

8

   Make sure there isn’t any dirt in the safety valve of the vacuum pool cleaner. It should restrain

 

the operation or the 

fl

 ow.

   The pump and the 

fi

 ltration system of the pool might be too small (not able to ensure the 

fl

 ow of 

4,5m

3

/h) Consult the expert in pools.

If the vacuum pool cleaner remains at one part of the pool

   Check the backwater and divert it as necessary by the ball recti

fi

 er.

   Check that the hose is suf

fi

 ciently long and reach the bottom of the pool.

   Check that the hose is properly loaded.

If the vacuum pool cleaner stops on the main drain

   Check that the main drain is shut. You might need a special help from an expert in pools.
   Make sure that the grill is installed on the main drain.
   If the main drain is not at the same levele as the bottom part of the pool, consult an expert in 

pools. 

If the vacuum pool cleaner slows down or stops and there are air bubbles in return pipe

   Find and 

fi

 x the air leak causing the defection on pump’s delivery.

   Check if the hose doesn’t run out.
   Check the hypotonic connection. It should be immersed in order not to take any air in the system.
   Check if the cover of the pump’s basket is not loose, cracked, worn or missing the O-rings. If you 

need help, consult an expert in pools.

If the vacuum pool cleaner draws air or remains on the surface

   Make sure that the immersion mechanism moves freely and that the immersion controller is 

installed. (See picture 4 – how to install the immersion controller.)

   Check if the automatic regulating valve is properly installed. Make sure it isn’t blocked with

the dirt.

   Make sure that the water level is at least 8 cm under the edge of the pool.
   Check if the vacuum pool cleaner moves in an appropriate speed 240-360 cm per minute.

If the vacuum pool cleaner remains by the stairs on the shallow end

   Check the backwater and divert it in required direction by the means of the ball recti

fi

 er.

   Check if the automatic regulating valve is properly installed. Make sure it isn’t blocked with

the dirt.

   Check if the hose is long enough to reach the furtest point of the pool including the stairs.
   Check if the hose has appropriate load for the shallow end of the pool.
   Check if the vacuum pool cleaner moves in an appropriate speed 240-360 cm per minute.

EN

Содержание BARACUDA













Отзывы: