Briggs & Stratton Snow 100000 Series, Руководство оператора

Страница: 9 / 48

Not for
Reproduction
6
Stopping the Engine
1. Turn the ignition key (A, Figure 5) to the OFF position and
remove it or remove the Push /Pull key, if equipped.
2. Keep the key in a safe place out of the reach of children.
The engine cannot be started without the key.
Adjusting the Discharge Chute and
Deflector
WARNING
Ice, gravel, or other unintended objects can be picked up by
the auger and thrown from the chute with force.
Objects thrown from the chute could cause death, serious
injury, or property damage.
• Always be aware of the direction the snow is being thrown.
NOTICE Do not use the chute deflector or the chute rotation
handle to lift the unit. These were designed for making needed
adjustment only.
Chute Rotation - Handle Mount (if equipped)
1. Squeeze and hold the button on the chute control handle
(C, Figure 7).
2. Push the handle forward or pull it rearward to rotate the
chute.
3. Release the button to lock the chute in the desired position.
NOTICE Do not use excessive force when trying to operate
the control.
Chute Rotation - Chute Mount (if equipped)
1. Grasp the chute control handle at the base of the chute (D,
Figure 7).
2. Turn the handle left or right to rotate the chute. A tension
plate holds the chute in the desired position.
Chute Rotation - Switch Mount (if equipped)
1. Press the switch (E, Figure 7) to rotate the chute.
2. Release the switch to lock the chute in the desired position.
Deflector Adjustment
1. Squeeze and hold the button on the deflector control handle
(F, Figure 7), or loosen the wing knob (F).
2. Move the deflector up or down to adjust the snow discharge
height and distance.
3. Release the button to lock the deflector in the desired
position, or tighten the wing knob.
9