background image

Safety Rules & Information

5

8. Always follow the engine manual instructions for stor-

age preparations before storing the unit for both short
and long term periods.

9. Always follow the engine manual instructions for

proper start-up procedures when returning the unit to
service.

10. Maintain or replace safety and instruction labels as

necessary.

11. Keep nuts and bolts tight and keep equipment in

good condition.

12. Never tamper with safety devices. Check their proper

operation regularly and make necessary repairs if
they are not functioning properly.

13. Components are subject to wear, damage, and dete-

rioration. Frequently check components and replace
with manufacturer’s recommended parts, when nec-
essary.

14. Check control operation frequently. Adjust and ser-

vice as required.

15. Use only factory authorized replacement parts when

making repairs.

16. Always comply with factory specifications on all set-

tings and adjustments.

17. Only authorized service locations should be utilized

for major service and repair requirements.

18. Never attempt to make major repairs on this unit

unless you have been properly trained. Improper ser-
vice procedures can result in hazardous operation,
equipment damage and voiding of manufacturer’s
warranty.

19. Check shear bolts and other bolts at frequent inter-

vals for proper tightness to be sure the equipment is
in safe working condition.

EMISSIONS

1. Engine exhaust from this product contains chemicals

known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.

2. If available, look for the relevant Emissions Durability

Period and Air Index information on the engine emis-
sions label.

IGNITION SYSTEM

1. This spark ignition system complies with Canadian

ICES-002.

21. Keep in mind the operator is responsible for acci-

dents occurring to other people or property.

22. Data indicates that operators, age 60 years and

above, are involved in a large percentage of power
equipment-related injuries.  These operators should
evaluate their ability to operate the unit safely enough
to protect themselves and others from injury.

23. DO NOT wear long scarves or loose clothing that

could become entangled in moving parts.  

24. Snow can hide obstacles.  Make sure to remove all

obstacles from the area to be cleared.

CHILDREN

Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the operating activity. Never assume that children will
remain where you last saw them.

1. Keep children out of the area and under the watchful

care of another responsible adult.

2. Be alert and turn unit off if children enter the area.
3. Never allow children to operate the unit.
4. Use extra care when approaching blind corners,

shrubs, trees, or other objects that may obscure
vision.

CLEARING A CLOGGED DISCHARGE
CHUTE

Hand contact with the rotating impeller inside the dis-
charge chute is the most common cause of injury associ-
ated with snowthrowers.  Never use your hand to clean
out the discharge chute.
To clear the chute:

1. SHUT OFF THE ENGINE.
2. Wait 10 seconds to be sure the impeller blades have

stopped rotating.

3. Always use a clean out tool, not your hands.

SERVICE, MAINTENANCE, AND STORAGE

1. Check shear bolts and other bolts at frequent inter-

vals for proper tightness to be sure the equipment is
in safe working condition.

2. Never store the machine with fuel in the fuel tank

inside a building where ignition sources are present
such as hot water and spacer heaters, or clothes dry-
ers.  Allow the engine to cool before storing in any
enclosure.

3. Always refer to the operator’s manual for important

details if the snowthrower is to be stored for an
extended period.

4. Maintain or replace safety and instruction labels as

necessary.

5. Run the machine a few minutes after throwing snow

to prevent freeze-up of the collector/impeller.

6. If fuel is spilled, do not attempt to start the engine but

move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.

7. Always observe safe refueling and fuel handling prac-

tices when refueling the unit after transportation or
storage.

Содержание 1695303





































Отзывы: