Briggs & Stratton 115400, Руководство пользователя, Страница: 129 / 281

128
5
2. Place a new bowl gasket on the carburetor
body.
3. Place the bowl on the carburetor. Install
the float bowl screw.
4. Torque the screw to values listed.
Identifying Main Jets
(235400, 245400, 28Q700)
Carburetor Service - Nikki
(28Q700)
CAUT ION: Do not use wires, drills or other
devices to clean out mete ring holes or passages.
NOTE
: Use compressed air at a moderate
pressure setting (5-7 PSI). Blow in both
directions to clean out all openings and
passages.
Location of the part number ([ A ] Fig. 131).
Fig. 131
Disasse mbly
1. Remove fuel bowl screws ( G ) and
separate fu el bowl ( H ) and solenoid ( E )
from the carburetor body ([ I ] Fig. 132).
Do not lose the spring betwee n the fuel bowl and
the float assembly.
Fig. 132
2. Remove the solenoid ( E ) from the fuel
bowl ([ H ] Fig. 132).
3. Remove the float assembly ( J ) from the
carburetor base ( I ).
4. Pull the hinge pin ( K ) from the float base.
5. Separate the float and needle from the
float base ([ L ] Fig. 133).
Model Series Standard Jet
High Altitude
Jet
235400 497570 497571
245400 498172 498172
28Q700 231858 231850