Brigantia 24-DVRS25NB-2, Руководство пользователя по установке, эксплуатации и техническому обслуживанию

Страница: 11 / 44

24-DVRS25NB(N)-2
11
Installation Instructions
Outside wall installation example
The Brigantia 24 - DVRS25NB(N) - 2 requires 120V for the operating system. There is a factory installed
electrical box to accommodate the connections. (see wiring diagram pg. 18)
The fireplace comes complete with a battery back - up system that will operate the fireplace for a limited
time in the event of a power outage.
The 120V circuit must be electrically grounded in accordance with the local codes or, in absence of local
codes, with the National Electrical Code ANSI/NFPA 70, or the Canadian Electrical Code CSA C22.1 .
Electrical Requirements
Secure sidewall termination to fireplace
with Milpac (DO NOT use silicone ) on
both inner exhaust and outer supply air
pipes. Once installed on the unit se-
cure the termination to the wall with
screws to each corner.
Horizontal termination 999 - DV - HTCL is to be used for direct connection to the unit. If extending
the vent using flex, a change to the 999 - DV - HTC is required.