Brigade MDR-404-500, Инструкция по установке и эксплуатации, Страница: 51 / 71

51
(h) Open an Internet Explorer web page and type the following http://192.168.1.100 . At this point, a pop-up window will appear Internet
Explorer requesting permission to allow the installation/running of a plug
in “X155”. See
Plugin Pop-up Figure 169 .
Plugin Pop-up Figure 169
(i) Allow the plugin and its installation.
(j) After the plugin is successfully installed, the login window (
Web User Login Figure 170 ) will appear.
Web User Login Figure 170
(k) There are 3 different types of login levels (as explained in section 4.3.4) i.e. Administrator , Power User and User . Enter the appropriate
password to grant the correct permissions, and then click LOGIN .
Note: If MDR security is disabled, click LOGIN without entering any details.
(l) Once logged in, 4 tabs will be displayed as follows: LIVE; PLAYBACK; SETUP and MAINTENANCE. See Web Application Manager Figure
171 .
10.2 Ethernet Operation:
(a) LIVE tab allows users to view the live cameras as shown in Web Application Manager Figure 171.
Note: The panel to the right (PTZ control and Play & Control) is not currently used.
Web Application Manager Figure 171
(b) PLAYBACK tab allows users to view and play recordings. Users can SEARCH by selecting the date from the calendar (
(c) Web Playback Figure 173), the type of recording and the source of the recording. Alternatively, scroll the list of recordings and select the
recording.
(d) Another method of viewing the recordings is by entering the date, the time and selecting the channel from the bottom left of the window.
(e) The advantage of this method is viewing multiple channels without having a monitor connected. In
Channel Selection Figure 172 users can
select which channel to be viewed.
(f) Web Playback Figure 173 illustrates the playback of 4 recorded channels.