Brigade MDR-404-500, Инструкция по установке и эксплуатации, Страница: 30 / 71

30
Options 3 of 3 Figure 71
Camera Event Settings Figure 72
Alarm Output 2 of 3 Figure 73
(d) VIDEO LOSS recording is active by default ( Options 3 of 3 Figure 71 ). When this recording has to appear as an alarm, this needs to be
activated in the CAMERA settings ( Camera Event Settings Figure 72 ). Additionally, such an alarm can enable the output triggers and
snapshots ( Alarm Output 2 of 3 Figure 73 ).
Note: By deactivating the Video Loss recording, the MDR only records channels that produce a video signal.
(e) Blind detection can be activated and its sensitivity ( B.D. SENSITIVE where 1 represents high sensitivity and 4 is the least sensitive) can be
adjusted ( Camera Event Settings Figure 72 ).
7.1.1 Panic Button
The panic button is a red button located on the Remote Status & Interface Panel (Optional).
(a) By pressing and holding it for more than 2 seconds, an alarm can be activated as shown in
Panic Button Settings Figure 74 .
(b) Browse to Settings

Event

Panic Button in order to disable it. Alternatively, add the LOCK option (see LOCKED FILE RETENTION in
section 4.1.1 Options).
Panic Button Settings Figure 74 Alarm Output 3 of 3 Figure 75
(c) Browse to Settings

Event

Alarm Output as explained in section 4.2.2 to configure the output triggers and snapshots ( Alarm Output 3
of 3 Figure 75 ).
7.2 Language
(a) Browse to Settings

Peripheral

Language Setting in order to change the language from default English to one of the following
options:

Russian

Spanish

Polish

Portuguese

Turkish
(b) Once the language has been selected press SAVE and then exit the OSD menu.
(c) The device will then reboot to activate the new OSD language.
7.3 Scheduled Recording
(a) Timer/ Ignition & Timer
– Auto boot function will allow this to work, only during the hours of the set Auto boot. If the record schedule is set
outside of the auto boot hours the MDR will not turn on (Only applies to Timer record mode )
(b) Browse to Settings

Record

Schedule in order to specify up to 7 x 2 scheduled recording combinations:
Schedule Settings Figure 76
Note: Ensure that ON/OFF type is TIMER (or IGNITION OR TIMER ) as explained in section 4.3.2 - ON/OFF TYPE . This will enable users to
either select the time for the MDR boot-up and shutdown or otherwise use the AUTO BOOT UP ON SCHEDULE option. Also ensure that
RECORD MODE is on TIMER as explained in section 4.1.1 - RECORD MODE .