7
Other information about the product
Product management and operation
• Do not expose the product to direct sunlight or intense light. The lens or internal circuitry may fail
otherwise.
• Use the product at a temperature between 14°F and 140°F (-10°C to 60°C) and store the product at
a temperature between -4°F and 158°F (-20°C to 70°C). The product may not function as designed
and some permanent physical damages may result if it is operated or stored out of the specified
temperature ranges. Such damages are not covered by the warranty.
• Frequently check the product for the proper installation position. Impact caused by extreme road
conditions may alter the installation position. Ensure that the product is positioned as instructed in
this guide.
• Do not apply excessive force when pressing the buttons. Doing so may damage the buttons.
• Do not use chemical cleaners or solvents to clean the product. Doing so may damage plastic
components of the product. Clean the product using a clean, soft, and dry fabric.
• Do not disassemble the product or subject the product to impact. Doing so may damage the product.
Unauthorized disassembly of the product voids the product warranty.
• Handle with care. If you drop, mishandle, or expose the product to external shocks, it may cause
damage and/or result in the malfunction of the product.
• Do not attempt to insert foreign objects into the device.
• Avoid excessive humidity and do not allow any water to enter the product. Electronic components
inside the product may fail if exposed to humidity or water.
• Depending on the make and model of your vehicle, the power may be constantly supplied to the dash
cam even when the ignition is turned off. Installation of the device to a continuously powered 12/24V
outlet could result in vehicle battery drainage.
• This device is designed to record video while the vehicle i s in operation. The quality of the video
might be affected by weather conditions and the road environment, such as whether it is day or night,
presence of street lighting, entering/exiting tunnels, and the surrounding temperature.
• Brigade is NOT responsible for the loss of any recorded video during operation.
• Although the device was designed to withstand high-impact car collisions, Brigade does not
guarantee the recording of accidents when the device is damaged as a result of the accident.
• Keep the windshield and camera lens clean for optimal video quality. Particles and substances on the
camera lens or windshield may reduce the quality of the recorded videos.
• This device is intended to be used inside the vehicle only.
