2
2
• Wait until the product is completely booted up after turning it on, and then begin operating the
vehicle The video recording does not begin until the product is completely turned on (booted up).
• When incident continuous recording starts, the buzzer sounds as a notification. This function
saves you time when checking the status LED to know the operating status of the product.
• To enable recording, you must insert a memory card into the product.
3.3 Recording manually
You can record a scene you want to capture while driving and store it as a separate file.
To start manual recording, press the REC button. Then, manual recording will start with the voice guide.
During manual recording, the product operates as follows
.
Mode
Operation description
Status LED
Manual
recording
When you press the REC button, a video will be recorded for 1 minute,
from 10 seconds before to 50 seconds after pressing the button, and
stored in the "manual_rec" folder.
(flickers swiftly)
3.4 Using parking mode
When the product is connected to the vehicle via the hardwiring cable, the operating mode is switched to
parking mode with the voice guide after the engine or electrical accessories are turned off.
• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable must
be professionally installed to the vehicle by a trained mechanic.
• To use all recording modes, insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may
differ. If you want to use parking mode for an extended period, check the battery level to prevent
battery depletion.
If you do not want to use parking mode or you want to change the mode settings, from the PC Viewer,
click Settings
>
Dash Cam Setting
>
Record settings.
During parking recording, the product operates as follows
.
Mode
Operation description
Status LED
Parking
recording
When a moving object is detected while parking, a video is
recorded for 20 seconds, from 10 seconds before to 10 seconds
after detection, and stored in the "motion_rec" folder.
(flickers slowly)
Incident parking
recording
When an impact is detected while parking, a video is recorded for
20 seconds, from 10 seconds before to 10 seconds after detection,
and stored in the "parking_rec" folder.
(flickers swiftly)
Using recording features
