– 2 –
I N T R O D U C T I O N
The "BRIG" inflatable heavy-duty boat, hereinafter referred to as the "Boat", was designed in two modifications HD410 and HD460 by the "BRIG"
Company basing on the principal provisions of International Organization for Standardization ISO 6185 "Plastomer and Elastomer Inflatable Boats".
1 . P U R P O S E
The "BRIG" Boats intended for the use on vessels, water areas belonging to ports and sea coastal zones as a heavy-duty boat, patrol
boat and for other professional purposes.
2. SPECIFICATIONS
The basic parameters and dimensions of the "BRIG" boat comply with the data specified in Table 1.
Table 1
No.
M O D E L
H D 4 1 0
H D 4 6 0
1
Overall dimensions:
-maximum length, m
4.1
4.6
-maximum width, m
1.95
1.95
-maximum height, m
1.6
1.6
2
Inflatable balloon diameter, m
0.5
0.5
3
Cockpit dimensions:
-maximum length, m
3.0
3.4
-maximum width, m
0.95
0.95
4
Deadrise angle at transom, degrees
1 0
1 0
5
Deadrise angle in middle section, degrees
2 0
2 0
6
Number of independent air-tight compartments, pcs
5 + 1
5 + 1
7
Maximum passengers capacity, men
7
1 0
8
Maximum weight-carrying capacity, kg
8 0 0
1 0 0 0
9
Maximum engine power, HP
4 0
5 0
1 0
Recommended engine power, HP
2 5
3 0
1 1
Transom height, mm
5 1 0
5 1 0
1 2
Total weight of boat without engine, kg
9 9
1 0 6
1 3
Rated excess pressure in balloon, Bar
0.15
0.15
1 4
Minimum excess pressure in balloon, Bar
0.1
0.1
1 5
Maximum excess pressure in balloon, Bar
0.22
0.22
1 6
Range of operating temperatures, °C
from -30 to +65
