– 1 1 –
2359.01
HD Series
Fig.12b
6.15.Bring the pressure in the compartments up to the operating
value (0.15 kgf/cm2). Afterwards, close reliably the inlet holes of
the valves.
6.16.Fill the inflatable keel with air up to the rated pressure value.
6.17.Assemble the oars by entering the removable parts with
blades into the locks until the click. Make use of the holes provided
in the oar handles to set the oars into the rowlocks with the blades
being faced to the aft. Secure the oars in the holders.
6.18.Close the water discharge valve holes with plugs.
6.19.Mount the outboard engine on the transom.
6.20.Arrange the fuel tank in a special place on the boarding. The tank
shall tightly seat between the restraining planks. Secure the tank with
belts.
7. SAFETY PRECAUTIONS AT OPERATION.
7.1.Before to start handling of the Boat read thoroughly this User's manual.
7.2.Before each usage check the Boat for completeness. The Boat may be used only provided its complete set complies with Section 3 of the
User's manual.
7.3.The Boat with an outboard engine may only be handled by the persons officially authorized to handle small-size vessels and having
appropriate job skills.
7.4.All operations associated with handling of the Boat and the outboard engine shall be performed in compliance with the User's manuals for
the Boat and outboard engine.
7.5.Before usage inspect the Boat, its components and make sure that they are ready for usage.Until sailing satisfy oneself that drain opening
on a transom is closed by plug.
7.6.Before lowering the Boat check the attachments of the paddles to the sides, thwarts to the brackets and fuel tank to the boarding.
7.7.The Boat lowering and lifting operations shall be performed with the help of a boat davit from the deck which should be free from
sharp protruding ship’s structures and parts which could damaged the fabric of the Boat.
Fig.12c
