Bridgeworks Tamar FCSAS102800, Руководство пользователя

Страница: 2 / 56

Warning
The Bridgeworks Tamar FCSAS102800 Fibre Channel to SAS Bridge contains no user serviceable
components. Only an Authorised Service Centre should carry out any servicing or repairs. Unauthorised
repairs or modifications will immediately void your warranty.
Before you start
There are a number of additional pieces of equipment you will require for the successful installation
of your Bridge:
Ethernet Cable
You will require at least one good quality cable of suitable length to go between your network
access point and the Bridge. This should be marked as certified to Cat 5e and have an RJ45 style
connector at the Bridge end.
SAS Cable
The Bridge uses a “Mini SAS” style connector, also known as an “iPASS” or “8088” connector, with
4 SAS connections per port. You will require a SAS cable that supports this connector at the Bridge
end and the type of connector your peripheral device supports at the other end.
Fibre Channel Cable
You will require at least one Multi-mode Optical Fibre 50/125 OM3/OM4 Patch Cable (LC) of suitable
length to go between your Bridge and device, host, or Fibre Channel switch.
If you are in any doubt, please contact your reseller for assistance.
2