Bridgeworks Tamar FCSAS102800, Руководство пользователя

Страница: 10 / 56

Installing the FCSAS102800 Bridge
The following are the basic steps to installing the FCSAS102800:
• Connecting the Ethernet cables
• Connecting the SAS cables
• Connecting the Fibre Channel Interface
• Connecting the Power Supply
Connecting the Ethernet Interface
The FCSAS102800 Management Interface can be used on the following network configurations:
• 10BASE-T
• 100BASE-T
• 1000BASE-T (Gigabit)
It is not necessary to specify which network type you are connected to, as the FCSAS102800 will
automatically select the correct network speed.
The connection to the management Ethernet network can be found at the back of the FCSAS102800,
labelled “MGMT A” and “MGMT B”.
To connect the FCSAS102800 to the management Ethernet network, insert a Cat 5E cable (or
better) into one of the “MGMT” ports at the back of the unit as shown in the following image. When
the plug is in the correct position a “click” should be heard. The other end of the cable should be
connected to a network.
10