BRT_AN_079 PanL Desk Manager 2.X User Guide
Version 1.0
Document Reference No.: BRT_000377
Clearance No.: BRT#179
9
Copyright © Bridgetek Pte Ltd
Grounding (Earthing):
Grounding faceplates- For products with
metal faceplates, ground the faceplates to
the product ground, and tie all the products
in a system to a common ground. This
prevents electrostatic discharge and can
prevent video ground loops.
Do not defeat the safety purpose of the
polarized or grounding –type plug. A
polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and third grounding prong.
The wide blade or the third prong is
provided for user’s safety. If the provided
plug does not fit into the outlet, consult an
electrician for replacement of the obsolete
outlet.
Power Sources:
This equipment should be operated only
from the power source indicated on the
product. This equipment is intended to be
used with main power system with a
grounded_Neutral_conductor or Line to
Line. The third (grounding) pin is a safety
feature, do not attempt to bypass or disable
it.
WARNING for Class I Products:
Class I products must be connected only to a
mains socket outlet with a protective Earthing
(Grounding) connection.
Power and IT system- Consult us before
installation if the product will be connected
to an IT power distribution system.
Power and Electrical Supply:
Appropriate power supply
-
Use only provided power supplies and
power sources with our products. Use of
unauthorized power supplies may harm
the equipment, may void the warranty,
and will void the regulatory compliance
status.
-
For power adapters with detachable DC
cords, consult the Manufacturer for
guidance.
-
Power supplies are intended for
continuous operation.
-
Our power supplies are universal input
voltage supplies that operate from 100-
240 VAC and are intended to function at
50 to 60 Hz. The ambient temperature
shall not exceed 50oC and the altitude
shall not exceed 2000m. Consult the
Manufacturer if the input power supply
being used is not provided by us. Make
sure to use the appropriate power
supply for corresponding models. If use
an LPS or Class2 type, and that it is
marked as “LPS” or “Class 2”.
WARNING: Disconnect the equipment from
the AC main before performing any service to
the equipment.
There are no user serviceable parts inside
our equipment.
Refer all servicing to qualified service
personnel. To prevent the risk of shock, do
not attempt to service this equipment by
yourself because opening or removing
covers may expose users to dangerous
voltage or other hazards and may void the
warranty
Ventilation, Mounting and Temperature:
Ventilation slots and opening- If the
equipment has slots or holes in the
enclosure do not block any ventilation
opening, as this may cause the product to
malfunction.
Install
the
device
in
accordance
with
the
manufacturer’s
instructions
Temperature – Do not install electronic
devices near any heat sources such as
radiators, heat registers, stoves or other
apparatus (including amplifiers) that
produce heat. If possible, do not expose the
product to direct sunlight. Also see “Rack
mounding
guidelines”
below
for
temperature guidelines.
Location of power supplies
-
External power supplies with either
plastic enclosures or metal enclosures
with vents must not be located within
environmental air handling spaces or a
wall cavity.
-
Our power supplies are intended for
indoor use only.
-
The power supply must not be
permanently fixed to the building or
similar structure.
Содержание PanL Desk Manager
Страница 1: ......
