Camera is sending too many pictures with motion sensor turned on:
a. Verify settings on the motion sensor
b. The camera may be caught in a loop due to weak cellular signal causing the motion sensor to
trigger over and over again. Change the motion detector setting on the “User Interface” to motion
every 5 minutes.
Motion Detector is Not Picking Up Motion
a. Verify settings on the motion sensor
b. Verify the red light is bright red on the motion sensor.
c. Verify the motion sensor is not obstructed in any way.
Other Resources
For “User Interface” instructions, see: User Interface Instructions.pdf on
www.eyetrax.net
For technical support, call (800) 5944157
