Bri-Mar DI-100, Руководство пользователя

Страница: 6 / 16

6
INSTALLATION OF REMOTE
CONTROL CABLE
IN CAB OR TRUCK
Drill either 13/16 or 3/4 inch holes through truck bed and through
cab of truck behind seat. Place remote control on transmission
hump in cab and run end of cable under seat and through drilled
hole in cab. Slide rubber grommet over end of cable and seat it in
the cab hole. Thread cable under bed and up through hole in bed
to interior bed. Slide the second rubber grommet over end of
cable and seat in bed hole. Connect remote control cable to pump
as per enclosed wiring diagram. Seal rubber grommet and cable
through the hole in cab of truck with silicone (not provided) to
prevent moisture from entering cab.
Remote Control Is Not Water Resistant
Do Not Submerse