50
Analog clock Ethernet configuration
.
DO NOT USE WITH DIGITAL CLOCKS
DO NOT USE WITH DIGITAL CLOCKS
The network interface provide UTC time to digital clocks. Time displays rules are configured in
each digital clock. For analog clocks, time displays rules are configured in the Ethernet
interface.
BRG can preconfigure the clock’s time display rules at the factory.
1.
Connect the clock to the Power over Ethernet capable network.
2.
Read the IP address from the digital display on the back of the clock.
3.
Enter the IP address into a web browser to access the Ethernet web configuration interface.
4.
Click on “Time Zone Configuration” from the menu on the left
5.
Enter the username: “user” and password: “password” when prompted.
6.
Enter the desired time display rules
7.
Click on the “Apply” button at the bottom of the page.
8.
If needed, change the NTP server information by clicking on “NTP Configuration”.
9.
Press the reset button on the clock to reset the hands and update the time.
Another method of configuring the Ethernet interface is to connect the PC directly to the
Ethernet interface. All network connections must be disabled on the computer except "Local
Area Connection". Right click on the network icon at the bottom of the screen. Click on “Open
Network Connections”, or go to, Start > Control Panel > Network Connections. If "Local Area
Connection" is not the only enabled connection, right click on the other connections and click on
disable.
