27
The Supervision/Monitor screen includes a variety of features as described below.
1
2
3
4
5
6
7
8
9
10
13
14
15
16
17
18
11
12
19
1.
The database window lists the clock address, location description, master clock time/date, slave clock
time/date and supervision status.
2.
The location description should indicate the location of the clock
3.
The Master Time indicates the time/date of the master clock at the time the slave clock was tested.
4.
The Slave Time indicates the time/date stored and maintained by the slave clock.
5.
The Status indicates No Response, Incorrect Time or Correct Time. No response results from either a
communications failure or a malfunctioning clock.
6.
To create a new slave clock record in the database, click on this button.
7.
To enter a new clock record, first enter the clock address number. Leading zeros are not required. Next
enter one or more spaces between the address and the description. Then enter the location description.
You must then press the keyboard Enter key to confirm and store the entry.
8.
To remove a record, left click on the record in the list. Next, left click on the Remove record button.
9.
The current active record number.
10.
The monitor can be configured to periodically monitor digital slave clocks.
11.
The database file may be saved to a backup and restored at a later date. A new database file may also be
created.
12.
The active file name and path is displayed above the list box.
13.
To manually start the monitor, click on the Start Monitor button.
14.
To stop monitoring, click on the Stop Monitor button.
15.
If multiple master clocks are used, they should be configured with a unique address. This list box is used to
select the master clock that will be used to monitor the slave clocks. An address of zero selects any and all
master clocks.
16.
The IP address of the master clock must be entered here. The Ethernet interface in the master clock must
be configured with the PC’s IP address if the PC and Master clocks are on different subnets.
17.
Clicking on this button clears the red alert message.
18.
Click the Exit button to exit the supervision/monitor program.
