12
Problem
Cause
Solution
Dispensed coffee is not
cold enough
(Continued)
I have the fridge set at
the coolest possible
temperature but the
beverage is not cold
enough, why is this?
The variance between the
Cold Brew coffee in your
container/BiB and at the tap
is 36°F (18°C). This means
if your cold brew coffee is
68°F (20°C) then the nitro
coffee at the tap will be 36°F
(2°C). For best results, use
cold brew coffee that has a
temperature of 68°F (20°C)
or cooler. Do not use frozen
or nearly freezing liquids
with your Cold Pro Nitro 2™.
The dispenser does not
dispense coffee
Filter adapter (13) in the
intake line is clogged.
Check to see if the filter
strainers are clogged and
clean per instructions on
page 9 of this manual if
needed.
Air compressor is turned off
or has no electrical power.
Check the power switch (6)
at the base of the dispenser
to ensure it is turned on and
if the dispenser has power.
Coffee is frozen.
Unplug the Cold Pro Nitro
2™ entirely from the power
supply and wait 15 minutes.
Repeat until the machine
starts to work correctly
again.
If the gas level to be put
into the coffee is set
too high, the gas flow
overpowers the liquid
flow. In this case no coffee
comes out of the tap.
Follow instructions in the
“Adjusting the Gas Level”
section on page 7. The
needle valve has a default
setup of 1 mm with a
tolerance of +/- 0.25
