36
37
CARE & CLEANING
THE DUAL BOILER™ CARE & CLEANING
CLEANING CYCLE
•
CLEAN ME! will be displayed on the
LCD to indicate when a cleaning cycle
is required (approx. 200 shots).
•
Insert the supplied cleaning disc,
followed by 1 cleaning tablet into the
1 CUP filter basket.
•
Insert the portafilter and lock into
group head.
•
Ensure the water tank is filled with cold
tap water.
•
Ensure the drip tray is empty & inserted.
•
Press MENU button until
CLEAN CYCLE icon flashes and
PUSH is displayed on the LCD screen.
•
To start the Clean Cycle press the
illuminated MANUAL button.
•
The CLEAN CYCLE icon will flash and
the machine will start to countdown
from 370 seconds.
•
When the cleaning cycle has finished,
remove the portafilter and ensure
the tablet has completely dissolved.
If the tablet has not dissolved, repeat
the steps above, without inserting a
new tablet.
•
Rinse the filter basket and portafilter
thoroughly before use.
INSTALLING WATER FILTERS
•
Soak filter in a glass of water for
5 minutes.
•
Rinse the filter and mesh under
running water.
•
Assemble filter into filter holder.
•
Set replacement date forward 2 months.
•
Install filter holder into water tank.
•
Insert water tank into the machine.
Ensure the latch is locked into position.
NOTE
To purchase filters contact Breville
Customer Service Centre on
AUS 1300 139 798 NZ 0800 273 845
or visit www.breville.com.au
NOTE
Change filters every 2 months.
Contact Breville Customer Service
Centre for advice.
CLEANING THE STEAM WAND
•
Wipe the steam wand with a damp cloth
& purge directly after texturing the milk.
•
If any of the holes in the tip of the
steam wand become blocked, ensure
the STEAM LEVER is in the CLOSED
position and clean using the pin on the
end of the cleaning tool.
•
If steam wand remains blocked, remove
the tip using the integrated spanner in
the cleaning tool and soak in hot water.
Screw tip back onto the steam wand
using the integrated spanner in the
cleaning tool.
CARE & CLEANING
CLEANING THE FILTER BASKETS AND
PORTAFILTER
•
The filter baskets and portafilter should
be rinsed under hot water directly after
use to remove all residual coffee oils.
If the holes in the filter baskets become
blocked, dissolve a cleaning tablet in
hot water and soak filter basket and
portafilter in solution for approx. 20
minutes. Rinse thoroughly.
CLEANING THE SHOWER SCREEN
•
The group head interior and shower
screen should be wiped with a damp cloth
to remove any ground coffee particles.
•
Periodically run hot water through the
machine with the filter basket and
portafilter in place, without ground
coffee, to rinse out any residual coffee.
CLEAR WATER BACK-FLUSH
•
Insert the cleaning disc into the 1 cup
filter basket.
•
Insert portafilter into the group head.
•
Press the 1 CUP button to build pressure
in the basket.
•
Repeat several times to remove residual
coffee oils in the espresso water paths.
CLEANING THE DRIP
& STORAGE TRAY
•
The drip tray should be removed,
emptied and cleaned after each use or
when the drip tray indicator is showing
Empty Me!
•
Remove grill from the drip tray. Wash
the drip tray in warm soapy water.
The Empty Me! indicator can also be
removed from the drip tray.
•
The storage tray can be removed and
cleaned with a soft, damp cloth (do not
use abrasive cleaners, pads or cloths
which can scratch the surface).
CLEANING THE OUTER HOUSING
& CUP WARMING TRAY
•
The outer housing and cup warming tray
can be cleaned with a soft, damp cloth.
Polish with a soft, dry cloth. Do not use
abrasive cleaners, pads or cloths which
can scratch the surface.
NOTE
Do not clean any of the parts or
accessories in the dishwasher.
DESCALE
(dESC)
Use this function to access descale procedures
when a descale alert is displayed on the LCD.
Please ensure you allow approximately 1.5 hour
to complete the entire descale process and
follow the step by step instructions.
If you’ve
just finished using your machine, please
ensure to turn the machine off and allow to
cool for at least 1 hour before starting your
descale process.
1 – Prepare for Descale
a)
Empty the drip tray and insert into
position.
b)
Turn the machine off and allow to cool
for at least 1 hour. With the machine
off, press and hold the 1 CUP button,
then press and hold the POWER button
together for 3 seconds. rEST will apear
on the LCD.
Содержание The Dynamic Duo BEP920
Страница 25: ...48 49 PAGE HEADER NOTES NOTES...
