background image

12

REPLACING THE FILTER 

Your Smart Air Plus

TM

 

Purifier filter should be 

replaced in the time frames indicated below.

• 

The filter life is approximately 6 months  

if used 24 hours daily, or 12 months if used  

12 hours daily.

• 

The filter life may vary to this timing 

depending on environmental conditions.

• 

Remove all packaging from the replacement 

filter and place the filter into the unit as 

described below.

1.  Carefully, turn your air purifier upside down  

and remove the locking knob from the base  

of the unit.

2.  Remove the base plate.
3.  Remove the used filter, being careful that 

any residue or debris that may fall from the 

filter will not cause damage.

4.  Insert the replacement filter into the unit, 

ensuring that it is correctly fitted and 

centred.

5.  Replace the base plate and refasten the 

locking knob.

6.  Return the air purifier to an upright 

position.

7.  Turn on the air purifier then press and  

hold the   POWER button for 5 seconds  

to reset the Filter Reset light.

NOTE

There is no top or bottom on the filter. The 

filter can be placed into the unit either way.

NOTE

If the filter is not in place or not fitted correctly, 

the air purifier will not operate.

WARNING

Unintended use of the air purifier or damage 

to the housing may result in the escape of 

dangerous UV-C radiation which is dangerous 

to the eyes and skin. Never operate the UV-C 

light outside of the air purifier.

CARE OF UV-C LIGHT

The replacement of the UV-C light must be 

undertaken at an authorised Breville service 

centre. Please contact Breville Customer 

Service Centre for further support.

REPLACEMENT FILTERS 

Replacement filters must be purchased from 

the Breville website^ or at participating retail 

outlets.
See the table below for the replacement 

product code to suit this Breville Air

 

Purifier.

Breville Air

 

Purifier 

Model No.

Filter Replacement 
Product Code

the Easy Air

TM

  

LAP150WHT

LAP015WHT

the Smart Air

TM

 

LAP300WHT

LAP030WHT

the Smart Air

  

Plus

TM

LAP500WHT

LAP050WHT

^Delivery charges may apply. 

Please contact Breville Customer Service 

Centre for further support.
Only use the original Breville  filter specially 

intended for this appliance. Do not use any 

other filters.

Содержание Smart Air Plus

















Отзывы: