Breville Smart Air Plus, Инструкция

Страница: 9 / 16

9
Functions
OPERATING YOUR AIR PURIFIER
1. Press the POWER button to turn on and
the control panel will illuminate.
2. The air quality sensor light will illuminate,
usually starting with a blue light until it has
time to sense the air quality and then it may
change to an alternate colour.
3. The air purifier will begin operation in the
last mode selected (excluding Night mode
and timer).
4. To adjust how the air purifier operates,
follow the directions below.
NOTE
The replace filter icon will illuminate indicating
that the filter needs to be replaced. To reset
the indicator after the filter has been replaced,
press and hold the POWER button for 5
seconds.
SensAir
TM
LIVE PURITY CONTROL
• Your Breville Smart Air Plus
TM
Purifier has a
built-in air quality sensor to detect changes to
air quality in the surrounding area.
• The SensAir
TM
light around the control panel
will change colours according to the quality
of the surrounding air.
• The LED screen provides real-time indication
of fine particles PM2.5 concentration.
Microbe Shield
TM
/NIGHT MODE
The Microbe Shield
TM
and Night Modes utilise
the same button on the control panel. Pressing
the Microbe Shield
TM
/NIGHT button will
cycle through these two settings.
Microbe Shield
TM
• Press the Microbe Shield
TM
/NIGHT mode
button until the Microbe Shield TM icon
illuminates to turn it on.
• Press the button repeatedly until the light
extinguishes to turn off this function.
Night Mode
• To turn on Night mode, press the Microbe
Shield
TM
/NIGHT button repeatedly until the
icon starts to blink.
• Press again until the light extinguishes to
turn off this function.
• After 10 blinks, all indicator lights on
the control panel will turn off as the unit
enters night mode and the fan speed will
automatically change to Low.
• Press any button on the control panel to
re-engage the control panel and turn off
night mode. The icon will extinguish.
NOTE
The Night mode function does not save for
next use when the air purifier is switched off.
This function will need to be reset.