![background image](http://html1.mh-extra.com/html/breville/pixie-clips-bec450/pixie-clips-bec450_instruction-manual_2809005016.webp)
16
220-240 V, 50-60 Hz, <1260 W
max
19 bar
~ 3 kg
0.7 L
11.1 cm 23.5 cm 32.6 cm
TROUblESHOOTIng
SPECIFICaTIOnS
COnTaCT THE Nespresso ClUb
For any additional information, in case of problems or
simply to seek advise, call the
Nespresso
Club. Contact
details of the
Nespresso
Club can be found in the
«Welcome to
Nespresso
» folder in your machine box or
at nespresso.com
In case of machine pick-up, please remove the
side panels and keep them safely.
No light.
➔
The machine has switched off automatically; press ON/OFF button.
➔
Check the mains: plug, voltage, fuse.
No coffee, no water.
➔
Check the water tank, if empty, fill with potable water. Descale it if necessary.
➔
Lift the lever. Press one coffee button and wait until water comes out.
Coffee is not hot enough.
➔
Preheat cup. Descale the machine if necessary.
The lever cannot be closed completely.
➔
Empty the capsule container/Check that there is not a capsule blocked inside the machine.
Leakage or unusual coffee flow.
➔
Check that the water tank is in position.
Lights flash irregularly.
➔
Call the
Nespresso
Club.
➔
Exit descaling procedure (see paragraph on descaling).
No coffee, water just comes out
(despite inserted capsule).
➔
In case of difficulties, call the
Nespresso
Club.
Machine switches itself off.
➔
To save energy the machine will turn itself off after 9 minutes of non use. See paragraph on «Energy
saving concept».
Front light is red.
➔
Water tank is empty or needs to be cleaned.
Pannel cannot be clipped.
➔
Ensure orientation as indicated per the arrows inside the panel. Start to clip from the top.
In case the panel still does not clip, call the
Nespresso
Club.