Descaling
❶
Empty the drip tray
and
the used capsule container.
❷
To enter the descaling mode
, ensure the machine is ON, press and hold
the 3 coffee buttons for 6 seconds until the confirmation with a beep. The 3
buttons will start blinking (buttons will flash until the exit of this mode).
❸
Fill the water tank
with 1
unit of
Nespresso
descaling
liquid and add 0.5 L / 17 oz
of water.
❹
Place a container
(minimum
volume: 0.8 L / 27 oz) under
the coffee outlet.
❺
Ensure the slider is closed
and press any coffee button
to start the descaling cycle,
pump will run. Machine will
stop automatically when
water tank is empty.
Info:
maintenance light is ON during the descaling process.
EN
EN
20
21
App.
fH
dH
CaCO
3
(
40 ml)
/ Niveau
< 5
< 3
< 50 mg/l
4000
fH
/ Niveau
> 7
> 4
> 70 mg/l
3000
dH
/ Niveau
> 13
> 7
> 130 mg/l
2000
CaCO
3
/ Niveau
> 25
> 14
> 250 mg/l
1500
/ Niveau
> 38
> 21
> 380 mg/l
1000
Water hardness:*
Descaling after:*
Level
0
French degree
Level
1
German Grade
Level
2
Calcium Carbonate
Level
3
Level
4
*On the App
, the water hardness can be adjusted any time under "Water status".
❽
Press any button to start
descaling a second time. Machine will stop
automatically when the water tank is empty.
Empty and rinse the water tank, drip tray and cup support thoroughly
to avoid any residue.
❾
Refill the water tank
with fresh potable water.
Press any button to start rinsing the machine, pump will run.
Machine will stop automatically when the water tank is empty.
Repeat this twice.
❿
To exit the descaling mode
, press and
hold the 3 buttons for 6 seconds until the
confirmation with a beep.
The machine is now ready for use.
❻
Refill the water tank
with the used
descaling agent (already passed
in the machine) collected into the
container.
❼
Empty
the drip
tray.
8775_UM_NESPRESSO_PRODIGIO_MILK_BREVILLE_.indb 20-21
20.10.15 12:33