12
13
OPERATING YOUR BREVILLE PRODUCT
OPERATING YOUR BREVILLE PRODUCT
OPERATING YOUR BREVILLE PRODUCT
OPERATING YOUR BREVILLE PRODUCT
USING THE GRIND CONTROL™
- CARAFE MODE
First Time Use Only
We recommend flushing the machine to
remove any dust particles or residue from the
manufacturing process. Follow the proceeding
instructions, ensuring to completely fill the
water tank. Step 1 (below) , select ‘12 CUPS’.
(Step 2, below) and the ‘PRE-GROUND’ coffee
setting. (Step 4, page 13). However
do not
add any coffee to the coffee basket
. Once
the cycle is complete, discard the water from
the carafe and repeat the cycle again for best
results. The machine is now ready to use.
1. Fill the Water Tank
Press the flip-top lid to open. Pour the desired
amount of cold, preferably filtered water into
the tank using a jug or the provided carafe.
Never use Distilled, De-mineralized or
highly filtered water as this will affect the
electronics and the taste of your coffee
.
If using the carafe, ensure the carafe is clean
and the carafe lid is securely locked in place.
The LCD screen will indicate the amount of
water in the tank as it is filled. The machine will
beep when full and the water level float will rise
to indicate the maximum level. Do not exceed
the 12 cup maximum. Doing so may cause the
carafe to overflow or water spillage at the back
of the machine. Close the flip-top lid.
NOTE
Always ensure your carafe is clean
before brewing. Residual coffee will
affect the taste of your next cup.
NOTE
Check the water level on the LCD
screen before use. We recommend
always keeping the water tank full. The
water tank should be refilled with cold,
preferably filtered water. Never fill with
de-mineralized water or any other liquid.
NOTE
Never pour water into the bean hopper
or grinding chamber area. Doing so can
cause the grinder to clog. Only
re-commence use when the grinding
chamber and grinding burrs are
completely dry. Refer to Troubleshooting,
‘Moisture clogging grinder’, page 26.
NOTE
Never fill the water tank once the coffee
machine has started a brewing cycle.
This will affect the volume dispensed
into the carafe.
2. Pre-Warm the Carafe
A warm carafe will help maintain the coffee’s
optimal temperature and keep coffee hotter
for longer. Remove the carafe lid by turning
counter-clockwise then lifting upwards.
Fill the carafe with hot water and leave to stand
for about 30 seconds then discard the water.
To lock the carafe lid back into position, align
the arrow on the carafe lid with the ALIGN
arrow on the carafe. Turn clockwise until the
arrow on the carafe lid aligns with the LOCK
arrow on the carafe. This ensures that the lid is
closed and in the proper position for brewing
and pouring. Place the carafe into position
under the drip stop outlet.
ALIGN
ARROWS
THEN TURN TO LOCK
NOTE
Ensure the carafe is clean and completely
empty and the lid is securely locked in
place before placing under the drip stop
outlet. Starting a brew cycle with water
or coffee in the carafe will cause the
carafe to over flow.
3. Select ‘Carafe’ Mode
Press the CUP|CARAFE button. The LCD
screen will display a Carafe symbol and the
current number of cups selected. Rotate the
CUP
|
CARAFE dial to select the required
number of cups to brew. You can choose less
than the current tank level (2 cup minimum),
while the maximum is the amount of water
in the tank, up to 12 cups. If you select cups
greater than the level in the water tank, the
LCD will display FILL TANK and the water
tank symbol will flash.
4. Select the Brew Strength or
‘PRE-GROUND’ Coffee Setting
There are 8 Strength settings. The LCD
screen will display the current strength
setting. Rotate the STRENGTH dial to select
your required Strength. 1 is the weakest and
8 is the strongest. We recommend starting
on setting 4 for a medium strength coffee.
Adjust strength higher or lower to suit
your taste.
NOTE
If using pre-ground coffee, rotate the
STRENGTH dial to select the
‘PRE-GROUND’ coffee setting. This
will disable the burr grinder. Add
pre- ground coffee to the gold tone
filter or a paper filter.
We recommend 1 level tablespoon of
pre-ground coffee per 5oz/150ml cup
of water. Adjust the amount according
to your individual taste. The maximum
capacity for pre-ground coffee is
12 level tablespoons. Exceeding this
amount may cause overflow.
5. Start the Brew Cycle
Press the START | CANCEL button.
The grinder will commence grinding the
correct amount of coffee for the selected brew
size and strength. If the ‘PRE-GROUND’
coffee setting has been selected, the grinder
will be disabled.
NOTE
Steam may emit from the rear steam
vent during grinding and brewing.
This is normal.