Care and cleaning
13
Reassembling your blender for cleaning, care and storage
12
BE CAREFUL WHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP.
MISHANDLING OF THE BLADES MAY CAUSE INJURY.
THE BLENDING BLADES ARE EXTREMELY SHARP. AVOID ANY CONTACT WITH FINGERS
AND HANDS. USE CAUTION WHEN HANDLING AND STORING.
Reassembling your blender jug
after cleaning
Step 1.
Ensure all parts are clean and completely dry.
Step 2.
To reassemble the blender, replace the silicon seal
onto the blade assembly (see Fig 1). Upturn the
blender jug and insert the blade assembly housing
into the jug base (see Fig 2), ensuring to align the
indicator symbol ( ) on the inside of the jug base,
with the indicator symbol ( ) on the blade
housing. Twist the
1
/
4
turn Blade Removal System
anticlockwise in the direction of the indicator symbol
( ) until firmly locked into position.
Fig 1
Fig 2
Cleaning the motor base
•
Wipe the motor base with a soft, damp cloth then
dry thoroughly.
•
Wipe any excess food particles from the power cord.
Do not use abrasive scouring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
Note
Cleaning the blender jug, lid, inner lid
and blade assembly
•
Wash all parts in warm soapy water with a soft
cloth. Use a kitchen bottle brush to dislodge
stubborn foods. Rinse and dry thoroughly.
The blender jug can be washed in the
dishwasher. Ensure the lid and blade assembly
have been removed from the blender jug before
placing into the dishwasher.
Note
Removing stubborn or strong food stains
and odours
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odour or
stain on the blender jug and lid. To remove, soak
blender jug and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Breville Ikon™ Blender upright with the
blender jug, lid and inner lid assembled and inserted
on the motor base or beside it. Do not place anything
on top.
BR8376 BBL600 Book AMEND DEC_06.qxp 22/12/06 10:53 AM Page 12