9
Step 8.
When 120 seconds is reached, the blender will
automatically cease to operate and the selected
speed button and ‘Stop’ button illumination will go
out. The ‘Power’ button will illuminate and flash. After
a few seconds the LCD timer screen will revert to ‘00’.
• The Ikon™ Blender will automatically stop
blending after 120 seconds (2 minutes).
This is a safety feature and restricts wear on
the motor.
• To stop blending at any time, press the ‘Stop’
button or the selected speed button. The
‘Power’ button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
The number of seconds on the LCD timer
screen will continue to count upwards to 120
seconds unless interrupted.
Note
Step 9.
The Breville Ikon™ Blender features two additional
functions, ‘ICE CRUSH’ and ‘SMOOTHIE’. These are
pre-programmed cycles which automatically adjust
the blending time and speeds to optimise blending
results. Select the required function by pressing the
corresponding function button.
The blender will start to operate and the selected
function button will illuminate. The ‘Power’ button will
illuminate and cease to flash. The ‘Stop’ button will
illuminate and flash. The LCD timer screen will start
counting downwards in one second increments until
‘00’ is displayed.
The smoothie function has a unique processing
technique that blends the denser ingredients at a
lower speed, then increases as ingredients
thicken. This may happen several times while
blending smoothies.
Note
When ‘00’ seconds is reached, the blender will
automatically cease to operate and the function
button and ‘Stop’ button illumination will go out.
The ‘Power’ button will illuminate and flash.
• To stop blending at any time, press the ‘Stop’
button or the selected function button.
The ‘Power’ button can also be pressed, but
this will also turn the appliance off and all
illuminations will go out.
• The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice
tray or 250g.
Note
Operating your Breville Ikon
™
Blender
continued
The Breville Ikon™ Blender features a Breville
Assist™ Lid. This allows the lid to fit tightly onto
the blender jug, avoiding displacement during
operation. The ring pull design allows the user to
easily remove the lid with a simple leverage
action. (See Fig 1)
Note
Step 5.
Plug the power cord into a 230/240V power outlet
and switch on.
Step 6.
Press the ‘Power’ button on the far left of the control
panel to turn the blender on. The ‘Power’ button will
illuminate and flash. The LCD timer screen will
illuminate with ‘00’ displayed.
Do not fill the blender jug above the ‘MAX’ line.
When the blender jug is filled at or near the
‘MAX’ line place one hand on the blender lid to
avoid displacement of the lid during operation.
Note
Step 7.
Select the required speed (1 to 5) by pressing the
corresponding speed button. The blender will start to
operate and the selected speed button will illuminate.
The ‘Power’ button will illuminate and cease to flash.
The ‘Stop’ button will illuminate and flash. The LCD
timer screen will start counting upwards in one
second increments until 120 seconds is reached.
Operate the blender only for the appropriate
amount of time required – do not over blend.
Note
8
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON™ BLENDER
WHILST THE MOTOR IS RUNNING.
Fig 1
BR8376 BBL600 Book AMEND DEC_06.qxp 22/12/06 10:53 AM Page 8
