Bresser Wind Gauge Pro, Инструкция по эксплуатации

Страница: 17 / 52

17 / 52
8. Press ALARM button during the alarm time display to
disable the alarm.
16 Snooze function
1. When the alarm sounds press the SNOOZE/LIGHT but-
ton to activate the snooze function. The alarm will
sound again in 5 minutes.
2. Press ALARM button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
3. The alarm will be turned off automatically if no button
is pressed within 2 minutes.
17 Receiving measurements automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
If no signal is received, go ahead with the following steps:
Press SCAN button for approx. 2 seconds to initate recep-
tion of measurements again.
Read the detailed manual for more information about read-
ings (see download information on page 2).
18 Setting the ice pre-alarm
Once the outside temperature falls below 3 ° C (37 ° F) and
the ice pre-alarm is activated, an additional alarm will sound
approx. 30 minutes before the actual alarm time.
1. Set and activate alarm (see "Alarm time setting").
2. Press ALARM button several times until the symbols
and appear together on the display.